Every of our case will come with free good quality tempered glass screen protector. Tempered glass is significantly better than plastic for a host of reasons: more protection, smoother on your fingers, won’t scratch as easily, and no screen bubbles. Here’s your step-by-step guide on how to install your new tempered glass screen protector.

Step 1: Clean Your Screen

Using our provided alcohol wipe to clean your screen, then using the dry wipe or microfiber cloth to dry your screen. Please ensure there's no fingerprints or marks on the screen.

Step 2: Remove Dust

Using the dust absorber sticker to remove all dust on the screen

Step 3: Remove the Protective Layer

Pull out the actual glass protector, there's a protective plastic film on one side. Remove it to expose the adhesive side of the glass. Be sure to hold it by the edges so that you don't leave fingerprints on the surface. This side will be facing down the iPhone.

Step 4: Alignment

Make sure to align the glass with the display portion of your screen. The glass should line up evenly with the front speaker and home button, and it should run parallel with the screen length-wise.

Step 5: Press It On

Once the glass protector has been properly aligned, carefully lay it down on the screen. If you make a mistake and the glass looks off-kilter, you can gently lift it up and realign it. Then, once the protector is on the screen, give it a soft press in the centre and allow the adhesive surface to grip to the screen naturally.

Step 6: Final Touches

If there are any bubbles remaining -- and there may not be -- use the cloth or dry wipe provided to gently smooth them toward the edges of the glass protector. Now your screen’s protected -- what else is there to worry about?